TAIZHOU ZEGO-TOOL MACHINERY CO.,LTD.
Contact Us
How to Connect Spray Gun

How to Connect Spray Gun

1. Connect an air hose to air nipple tightly.

2. Connect a fluid hose or a container to fluid nipple tightly.

3. Flush the gun fluid passage with a compatible solvent.

4. Pour paint into container, test spray and adjust fluid output as well as pattern width.


CAUTION:

  • Use clean air filtered through air dryer and air filter.

If not, dirty air can cause painting failure.


  • When you use this gun for the first time after purchasing,adjust fluid needle packing set.

Slowly tighten fluid packing seat and loosen a bit when fluid needle set does not return smoothly,and adjust so that fluid needle set smoothly moves.


  • If you use this gun for the first time after purchasing,clean fluid passages spraying thinner and remove rust preventive oil.

If not, remaining preventive oil can cause painting failure such as fish eyes.


If not, disconnection of hose and drop of container can cause bodily injury.

Related Articles
  • Spray Gun Troubleshootings

    Spray Gun Troubleshootings

    November 7, 2019Spray PatternFlutteringProblems:1. Air enters between fluid nozzle and nozzle seat.2. Air enters between air baffle and gun body.3. Air is drawn form fluid needle packing set.4. Air enters at fluid co...view
  • Cleaning and Maintenance of Spray Gun

    Cleaning and Maintenance of Spray Gun

    November 7, 2019Pour remaining paint out after use, clean each each section of the spray gun with thinner.Spray defined amount of thinner to clean fluid passages until clean enough. Then clean with a soft cloth. If n...view
  • Spray Gun Operation Safety Precautions

    Spray Gun Operation Safety Precautions

    November 7, 2019view
  • How to Operate Spray Gun

    How to Operate Spray Gun

    November 7, 20191. Suggested air pressure of 2.0-3.0 bar(30-43psi).2. Recommended paint viscosity differs according to paint property and painting conditions,18±2 sec./Iwata cup#2is recommendable.3. Keep fluid outpu...view