Contact Us
What are the Differences Between HVLP and Airless Spraying Machine

What are the Differences Between HVLP and Airless Spraying Machine

In HVLP ( "high capacity, low pressure"), the paint is atomized by the air extracted from the air compressor or turbine pump, while in airless sprayers, high pressure and tight extrusion cut the paint into particles, since the piston pressurizes the material from an orifice, which is smaller than the nozzle of HVLP.

The Differences between HVLP and Airless Spraying Machine

Airless sprayers are designed for large, relatively flat surfaces, such as walls, tanks, bins, and siding. By comparison, HVLP is suitable for exquisite finish and higher precision required by the contractor, such as handrail, door, cabinet work and window frame."HVLP can replace electric brush and airless sprayers the roller." He said, "They are actually complementary to each other."

The product transfer rate of airless sprayer is only 50%, while HVLP can reach at most 90%. But airless units are more powerful, while HVLP production, not the production of it, is high.

Unlike the airless sprayer, best HVLP spray gun for cars has a second control knob for adjusting the air flow, so that the user can better control the of the fan. Due to its less overspray, HVLP is a good choice, when expensive coatings are used.

HVLP finish looks better. Compared with particles pushed by airless sprayer, the atomized particles of HVLP are smaller and more uniform. The difference does not matter when painting dry walls with latex wall paint. But when using HVLP to spray varnish or enamel paint, you can see a finer, smoother surface. Otherwise, the painter may "fight" with the terrible "orange surface", which is a mottled surface texture appearance, rather than a smooth surface.

HVLP is also very convenient for decoration. But airless sprayer units are better for mass work, such as the exterior walls of houses. The airless equipment will finish the loading and unloading of one can of paint at the rate of 0.5-2 gallons per minute, which is much quicker than HVLP, which will do at the rate of 15 or 20 ounce per minute. Speed is a big factor.

Coarse grinding powder, such as flat or enamel emulsion paint, is not suitable for HVLP. They can be brushed, rolled or painted with airless units. The finer the grinding, the more favorable the paint is for spraying.

Turbine HVLP and HVLP connected to the air compressor vary in cost and performance. The turbine works in the opposite way to the vacuum cleaner and is lighter than the compressor model. In addition, their heated air can speed up the drying. It's much easier to just install the turbine unit and plug in.

Related News
  • Selection and Maintenance of the Auto Spray Gun

    Selection and Maintenance of the Auto Spray Gun

    March 9, 20211. Selection of the Auto spray gunIn terms of the choice of Auto spray gun, we should pay attention to the fact that the primer mainly plays the role of filling gap in the coating and increasing the t...view
  • The Maintenance of Spray Gun

    The Maintenance of Spray Gun

    August 27, 20201. Often check the needle valve and gasket, and check whether there is leakage at the seal of air valve gasket, if so, it should be replaced in a timely manner; Grease the seal gasket frequently to so...view
  • How to Choose the Right Spray Gun?

    How to Choose the Right Spray Gun?

    August 23, 20201. Size and quality of the spray gun itself From the perspective of reducing the labor intensity of the operator, it is hoped that the spray gun is light and small, but the amount of coating and the a...view